STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 MOBILE LUER LOCK VENT FILTER 160 CM
Vous êtes :
The sterile, DEHP-free, BPA-free INFINEED 1-way infuser with photoprotective UV filter has been designed to minimize its environmental impact, using exclusively raw materials free of endocrine disruptors (elimination of components containing DEHP or BPA). Made in China.
Infuser with:
Dual Channel Perforator
Air intake: Delivered closed for immediate pocket use - 0.2µ filter.
Chamber: Soft and translucent - Calibrated at 20 drops = 1ml ± 0.1ml - 15µ anti-particle filter.
Caster: Precise and reliable, linear flow regulator.
Tubing: translucent yellow PVC designed for comfort and optimal adjustment regularity and to avoid kinks.
Terminal tip: Mobile Luer Lock.
Terminal cap: Equipped with a purge filter with anti-bacterial membrane.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without
evaporation time, and while the luer lock is connected, therefore under
physical stress, presents a significant risk of cracking of the luer
lock, and should be avoided as much as possible.
In
accordance with the recommendations of the SF2H (2019), disinfecting the
connectors (when necessary) with 70° ethyl alcohol is always
preferable, as it is just as effective in disinfecting inert materials
and there is much less risk of altering plastic materials.
Indications
This device allows the administration by gravity of parenteral injectable preparations: drugs, solutions, parenteral nutrition, photosensitive drugs.
Gravity infusion set, do not use with pressure. Do not use for transfusion or for medicine that need a 0.2µm filter.
On the peripheral or central route, the infusion line can remain in place for a maximum of 96 hours (following the establishment's hygiene protocol).
Dispose according to the state member regulation.
Matériaux utilisés
PVC tubing chamber
DEHP < 0.1% m/m
ABS flow regulator
Luer lock ABS
Polyethylene (PE) protective cap
Étiquetage
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
dispositif médical
stérile
conformité
Conditions de transport
Store away from light and moisture, at a temperature between 10 and 40°C.
| Conditionnement | Quantités de pièces | Dimensions en cm | Poids en kg | Ean 13 du conditionnement |
| UNIT | 1 | 23 x 13 x 0 | 06972620110466 | |
| BAG | 25 | |||
| CASE | 200 | 46 x 52 x 40 | 16972620110463 |
