Contact customer service

Your research

Welcome

You are:

A professional
Cancel Validate
A particular
Cancel Validate
dr.helewa
dr.helewa
English
  • Français
  • Español
English
  • Français
  • Español
< RETOUR

LATEX-FREE STERILE POWDER-FREE NITRILE SURGERY GLOVE EPICN T8

Reference : EP-13-80

<ul><li>Nitrile intervention and surgery gloves, powder-free, flexible and resistant.</li><li>They provide healthcare professionals with a significant level of protection against numerous infectious agents, particularly viruses.</li><li>Latex-free, they have a very good level of skin tolerance.</li><li>Powder-free, gamma sterilized surgical glove.</li></ul>

Add to my quote request
Description
Description

These gloves are hand specific with curved fingers.<br>Smooth surface and beaded cuff.<br><br>Color: natural.<br><br>Surface treatment with chlorination.<br><br>Powder residue: &lt;2mg/glove (without powder).<br>Palm width: 83 +/- 5mm. Length: min 280mm. Single wall finger thickness: min 0.16 +/- 0.02 and typical value 0.16. Single wall palm thickness: min 0.14mm and typical value 0.15. Single wall thickness cuff: min 0.13 +/- 0.02 and typical value 0.12.<br><br>These gloves also have the CE marking under Regulation 2016/425 PPE (category III, type B).<br>

Technical
information
Technical
information

Indications 
Procedures requiring a sterile glove.

Used materials 
100% Nitrile (Acrylonitrile butadiene)

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : IIa
  • MD notified body : BSI CE2797
  • annexe : IX

EPI 

  • european directive(s) - regulation(s) : 2016/425 EU Regulation
  • IPE category : III
  • IPE notified body : BSI CE2797

sterile 

  • sterile : yes
  • sterilization method : gamma ray

conformity 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Protective gloves — General requirements and test methods
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

Logistics
information
Logistics
information

Transport conditions 

Protected from light, humidity and heat

Conditioning Parts quantities Dimensions in cm Weight in kg Ean 13 of conditioning
UNIT 1 3661809038358
BAG 50 3661809038365
CASE 300 3661809038372
Request the technical sheet

These gloves are hand specific with curved fingers.<br>Smooth surface and beaded cuff.<br><br>Color: natural.<br><br>Surface treatment with chlorination.<br><br>Powder residue: &lt;2mg/glove (without powder).<br>Palm width: 83 +/- 5mm. Length: min 280mm. Single wall finger thickness: min 0.16 +/- 0.02 and typical value 0.16. Single wall palm thickness: min 0.14mm and typical value 0.15. Single wall thickness cuff: min 0.13 +/- 0.02 and typical value 0.12.<br><br>These gloves also have the CE marking under Regulation 2016/425 PPE (category III, type B).<br>

Indications 
Procedures requiring a sterile glove.

Used materials 
100% Nitrile (Acrylonitrile butadiene)

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : IIa
  • MD notified body : BSI CE2797
  • annexe : IX

EPI 

  • european directive(s) - regulation(s) : 2016/425 EU Regulation
  • IPE category : III
  • IPE notified body : BSI CE2797

sterile 

  • sterile : yes
  • sterilization method : gamma ray

conformity 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Protective gloves — General requirements and test methods
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

Transport conditions 

Protected from light, humidity and heat

Conditioning Parts quantities Dimensions in cm Weight in kg Ean 13 of conditioning
UNIT 1 3661809038358
BAG 50 3661809038365
CASE 300 3661809038372

Associated products

Associated products

Request for technical documentation

  • Didactic formally undertakes not to sell, rent or exchange any personal information. In application of articles 39 and following of the law of January 6, 1978 modified relating to data processing and freedoms (CNIL), you have the right to access, delete and rectify information concerning related to you.